Download File 🔗 https://bltlly.com/2uZjP9

DriverJinka 1351 Download: The Ultimate Guide for Windows Users

If you are looking for a reliable and affordable cutting plotter that can handle various types of materials, you might want to consider the DriverJinka 1351. This device is designed to cut vinyl, paper, cardstock, and other thin materials with high precision and speed. But before you can use it, you need to download and install the driver and software that are compatible with your Windows operating system.

In this article, we will show you how to download DriverJinka 1351 for free and fast, and how to set it up properly on your computer. We will also give you some tips and tricks on how to use the DriverJinka 1351 effectively for your projects.

What is DriverJinka 1351?

DriverJinka 1351 is a cutting plotter that uses a blade to cut various shapes and designs on different materials. It is also known as a vinyl cutter, a sticker cutter, or a craft cutter. It can be used for making signs, stickers, decals, labels, logos, banners, and more.

DriverJinka 1351 has a cutting width of 1260 mm and a cutting force of 500 g. It can cut at a maximum speed of 800 mm/s. It supports standard cutting languages such as DMPL and HPGL. It also has a red eye sensor that can detect registration marks for contour cutting.

DriverJinka 1351 comes with a USB interface that allows you to connect it to your computer. However, you need to install the driver and software that are compatible with your Windows operating system first. Otherwise, your computer will not recognize the device or communicate with it properly.

How to Download DriverJinka 1351 for Free and Fast?

To download DriverJinka 1351 for free and fast, you need to visit the official website of Jinka Indonesia. This is the manufacturer of DriverJinka 1351 and other cutting plotters. On their website, you can find the driver and software that are suitable for your device and your Windows operating system.

Here are the steps to download DriverJinka 1351 for free and fast:

1. Go to https://jinkapro.com/driver-support/
2. Scroll down to the section “Driver dan Software”
3. Find the file “USB Driver JINKA NXL All Series” and click on it
4. A new tab will open with a link to download the file from MEGA
5. Click on the link and wait for the file to be downloaded
6. Extract the zip file to a folder on your computer
7. You have successfully downloaded DriverJinka 1351 for free and fast

How to Install DriverJinka 1351 on Your Computer?

After you have downloaded DriverJinka 1351 for free and fast, you need to install it on your computer. This will allow your computer to recognize the device and communicate with it properly. The installation process is simple and straightforward, but you need to follow some steps carefully.

Here are the steps to install DriverJinka 1351 on your computer:

1. Connect the DriverJinka 1351 to your computer using the USB cable
2. Turn on the DriverJinka 1351 and wait for a few seconds
3. Your computer will detect the device and show a message that says “Installing device driver software”
4. If your computer does not have the driver installed, it will show a message that says “Device driver software was not successfully installed”
5. In that case, you need to go to the folder where you extracted the zip file that you downloaded earlier
6. Find the file “CH341SER.EXE” and double-click on it
7. A window will pop up that says “CH341SER Setup”
8. Click on “Install” and wait for the installation to finish
9. A window will pop up that says “Install Successfully”
10. Click on “OK” and close the window
11. Your computer will show a message that says “Device driver software installed successfully”
12. You have successfully installed DriverJinka 1351 on your computer

How to Use DriverJinka 1351 Software?

After you have installed DriverJinka 1351 on your computer, you need to use the software that can control the device and send the cutting commands to it. There are different types of software that you can use with DriverJinka 1351, such as Artcut, Anycut, SignMaster, and CorelDraw. Each software has its own features and functions, but they all have the same basic steps to use DriverJinka 1351.

Here are the steps to use DriverJinka 1351 software:

1. Open the software that you want to use on your computer
2. Create or import the design that you want to cut on the software
3. Adjust the size, position, and orientation of the design according to your preferences
4. If you want to do contour cutting, you need to add registration marks to the design and print it out first
5. Select the cutting option on the software and choose DriverJinka 1351 as the output device
6. Set the cutting parameters such as speed, force, offset, and origin according to your needs
7. Load the material that you want to cut on the DriverJinka 1351 and align it with the rollers
8. If you are doing contour cutting, you need to use the red eye sensor to scan the registration marks on the printed design
9. Press the cut button on the software and wait for the DriverJinka 1351 to start cutting
10. When the cutting is done, unload the material from the DriverJinka 1351 and weed out the excess parts
11. You have successfully used DriverJinka 1351 software

How to Use DriverJinka 1351 Red Eye Sensor?

The red eye sensor is a special feature of DriverJinka 1351 that allows you to do contour cutting. Contour cutting is the process of cutting along the edges of a printed design, such as a sticker or a decal. This way, you can create custom shapes and sizes for your projects.

To use the red eye sensor, you need to have a printed design that has registration marks on it. Registration marks are small black squares that are placed around the design. They help the red eye sensor to align the cutting path with the printed design.

Here are the steps to use DriverJinka 1351 red eye sensor:

1. Print out your design with registration marks on it using a printer
2. Load the printed material on the DriverJinka 1351 and align it with the rollers
3. Press the “Menu” button on the control panel of DriverJinka 1351
4. Select “Contour Cut” and press “Enter”
5. Select “Auto Scan” and press “Enter”
6. The red eye sensor will move across the material and scan the registration marks
7. If the scan is successful, the display will show “Scan OK”
8. If the scan fails, the display will show “Scan Fail” and you need to check the material alignment, registration marks, and sensor position
9. Press “Enter” to confirm the scan result
10. The red eye sensor will move back to the origin point and wait for the cutting command
11. Send the cutting command from your software and wait for DriverJinka 1351 to start contour cutting
12. You have successfully used DriverJinka 1351 red eye sensor

How to Optimize DriverJinka 1351 Cutting Settings?

One of the most important aspects of using DriverJinka 1351 is to optimize the cutting settings according to the material and the design that you want to cut. The cutting settings include the speed, the force, the offset, and the origin. These settings will affect the quality, accuracy, and efficiency of your cutting results.

Here are some tips on how to optimize DriverJinka 1351 cutting settings:

• Speed: The speed refers to how fast the blade moves across the material. The speed can be adjusted on the control panel of DriverJinka 1351 or on your software. The speed range is from 10 mm/s to 800 mm/s. Generally, you should use a lower speed for thicker or harder materials, and a higher speed for thinner or softer materials. You should also use a lower speed for more complex or detailed designs, and a higher speed for simpler or larger designs.
• Force: The force refers to how much pressure the blade applies on the material. The force can be adjusted on the control panel of DriverJinka 1351 or on your software. The force range is from 10 g to 500 g. Generally, you should use a higher force for thicker or harder materials, and a lower force for thinner or softer materials. You should also use a higher force for deeper or cleaner cuts, and a lower force for shallower or smoother cuts.
• Offset: The offset refers to the distance between the tip of the blade and the center of the blade holder. The offset can be adjusted on your software. The offset range is from 0 mm to 1 mm. Generally, you should use a smaller offset for sharper or narrower angles, and a larger offset for rounder or wider angles. You should also use a smaller offset for smaller or finer designs, and a larger offset for bigger or coarser designs.
• Origin: The origin refers to the starting point of the cutting path. The origin can be set on the control panel of DriverJinka 1351 by pressing the “Origin” button. You can also move the blade manually by using the arrow buttons. Generally, you should set the origin at the lower right corner of your material, unless your software specifies otherwise. You should also make sure that the origin is aligned with your design on your software.

By optimizing DriverJinka 1351 cutting settings, you can achieve better cutting results and avoid wasting time and material.

How to Troubleshoot Common Problems with DriverJinka 1351?

Even if you have optimized your cutting settings and followed the installation and usage instructions, you may still encounter some problems with DriverJinka 1351. Some of these problems are easy to fix, while others may require more technical assistance. Here are some common problems and possible solutions for DriverJinka 1351:

• The device is not recognized by the computer: This could be caused by a faulty USB cable, a loose connection, a missing or corrupted driver, or a conflicting device. To fix this problem, you can try the following steps:
  • Check the USB cable and make sure it is securely plugged into both the device and the computer
  • Try using a different USB port or a different USB cable
  • Reinstall the driver from the official website of Jinka Indonesia
  • Disable or uninstall any other devices that may interfere with the device, such as webcams, scanners, printers, etc.
• The device does not cut properly: This could be caused by a dull or damaged blade, a dirty or misaligned red eye sensor, incorrect cutting parameters, or a faulty material. To fix this problem, you can try the following steps:
  • Replace the blade with a new one and make sure it is properly inserted into the blade holder
  • Clean the red eye sensor with a soft cloth and make sure it is aligned with the registration marks
  • Adjust the cutting parameters such as speed, force, offset, and origin according to the material and the design
  • Use a suitable material that is compatible with the device and make sure it is flat and smooth
• The device makes loud noises or stops working: This could be caused by a mechanical failure, an electrical failure, or overheating. To fix this problem, you can try the following steps:
  • Turn off the device and unplug it from the power source
  • Check for any visible signs of damage or wear on the device and its components
  • Contact the manufacturer or a qualified technician for repair or replacement

By troubleshooting common problems with DriverJinka 1351, you can improve your cutting experience and avoid wasting time and material.

Conclusion

DriverJinka 1351 is a cutting plotter that can cut various materials and designs with high precision and speed. It has a red eye sensor that can do contour cutting and a USB interface that can connect to your computer. To use DriverJinka 1351, you need to download and install the driver and software that are compatible with your Windows operating system. You also need to optimize the cutting settings according to the material and the design that you want to cut. If you encounter any problems with DriverJinka 1351, you can use the troubleshooting techniques that we have discussed in this article. We hope that this article has helped you to learn more about DriverJinka 1351 and how to use it effectively for your projects.

https://github.com/denictuli/inspinia/blob/master/Angular_1_Seed_Project/Crossfire%20fast%20knife%20hack%20free%2013%20The%20best%20way%20to%20get%20unlimited%20kills%20and%20coins.md
https://github.com/granunvine/termloop/blob/master/_examples/Registration%20Code%20For%20Wondershare%20Tips%20and%20Tricks%20for%20Getting%20the%20Best%20Deal.md
https://github.com/8latceKnena/system-design-primer/blob/master/solutions/Logic%20Print%20Keygen%20A%20Simple%20and%20Effective%20Way%20to%20Activate%20Logic%20Print.md
https://github.com/8incupFosbe/system-design/blob/main/diagrams/JRuler%20Pro%203.1%20A%20Powerful%20and%20Versatile%20Screen%20Ruler%20for%20Windows.md
https://github.com/9stabvalKtiowa/aquila/blob/master/inc/helpers/Yaariyan%203%20Full%20Movie%20In%20Hindi%20Hd%201080p%20UPDATED.md
https://github.com/7multabelgo/best-of-ml-python/blob/main/config/Serial%20Corel%20Draw%20X7l.md
https://github.com/tersviefpe/LibreSprite/blob/master/installer/English%20Subtitles%20for%20Ice%20Age%20Collision%20Course%20(English)%20Movie%20-%20Download%20or%20Watch.md
https://github.com/denictuli/inspinia/blob/master/Angular_1_Seed_Project/Create%20Read%20Write%20and%20Modify%20MS%20Word%20Excel%20PowerPoint%20and%20PDF%20Documents%20with%20Spire.Office%20Platinum%20v3.4.0.md
https://github.com/invoMdibe/sway/blob/master/sway-lib-std/Twins%20Of%20The%20Pasture%20Crack%20And%20Patchl%20The%20Best%20Way%20to%20Play%20the%20Game.md
https://github.com/0arapterpbi/awesome-project-ideas/blob/master/images/The%20Ultimate%20Guide%20to%20Diner%20Dash%205%20Boom%20Free%20Download%20Full%20Version%20Crack.md

86646a7979